User manual

Page 79
Upgrade the Receiver Software
Page 79
Upgrade the Receiver Software
Once in a while, we m ay upgrade your r eceiver’s software for free. Yo u can
set up the rec eiver to Rece ive a Software Upgrade and/or Set Up the
Receiv er to Tell You About Upgrades.
Receive a Software Upgrade
1. Ma ke sure you turn the receiver off, so its green front panel POWER
light is off. To do this, press the re mote control’s blank POWER button
while the r emote control is in SAT mode.
2. While the receiver is taking the upgrade, the rec eiver ’s
front panel POWER light will blink. Don’t disturb or
unplug the rec eiver while the new software is
downloading.
Note: The software upgrade m ay take up to a bout half an hour.
Set Up the Receiver to Tell Yo u About Upgrades
You can set up the rec eiver to te ll you when you can get a software upgrade;
it’ll ask you to let it get the software . Unless you set up the receiver to ask
you, automatically download new softwa re without asking.
1. Press the MENU button.
2. Select the
System Setup option.
3. Select the
Installation option.
4. Select the
System Upgrades option.
5. Select the
Ask before downloading
option or the Without my p erm i ssion
option.
Note: A “download” is the same as an
upgrade.
6. Select the
Save option to save your choice.
or: