User manual

Chapter 3
Page 62
Using the System
Press the PAUSE button and then press the FWD button to forwa rd the
program in slow motion. When you press the FWD button once the program
advances at 1/15 the speed of nor mal play. Press the FWD button twice to
forward at 1/4 as fast as normal play. Press the FWD button three times to
play the program .
Note: Of course, you can’t “forwa rd” into the part of a “live” program that
hasn’t been broadcast yet.
Press the PLAY button to watch the program. Also, press this
button to switch from pause, forward, or reverse to play.
Press the SKIP BACK button to skip back about ten seconds in a
recorded program . Press this button again to skip back again.
Press the PAUSE button a nd then press the skip back button to
reverse the r ecording one frame at a time.
Press the SKIP AHEAD button to skip a head about 30 seconds in
the program. Press this button again to skip ahead again.
Press the PAUSE button a nd then press SKIP AHEAD to advance
the recording one frame at time.
Note: Of course, you c an’t “forward” into the part of a “live” program that
hasn’t been broadcast yet.
Press the VIEW button to catch up with the program as it’s showing
now.
Use On-Demand Recording
Turn the receiver on and tune it to a channel.
Note: If you record a locked program while you have the receiver locked,
you’ll have to enter the password to pla y back that program.
Start Reco rding a P rogram
• At a program’s start, press the remote control’s RECORD
button.
If you’ve watched a program from its start, up to about one
hour after it’s started, you can re verse to its start:
1. P ress the BACK button.
2. Let the program reverse to its start.
3. P ress the RECORD button.
You’ll get all of the program on
your recording.
Note: If you don’t tune to a program
until after it star ts, you can record only
the part of the program that comes
after you tune to it.