User manual

Page 51
Use Event Timers
Page 51
Set an Automatic Event Timer
1. Highlight and select a future program in the Bro wse Banner,inthe
Program Guide, or in a T hemes list.
This opens the
Create a n Ev ent Timer menu.
2. Select a
Timer Type option. A check m ark
shows up next to the option you select. For
example, here we selected the
DVR option.
3. Select a
Timer Frequency option. A check
mark shows up ne xt to the option you select.
For example, here we selected the
Once
option.
4. Only for a Onc e (one-time), DVR Event Timer,
you can select the
Protect R ecording check
box. If you do this, a check mark shows up in
the box.
Note: When you protect a recorded program, the receiver will a sk you
before it records over that program.
5. Select the
Create option to set the event timer. You’ll se e a clock picture
on the program in the
Program G uide, and also when you press the
INFO button to get information about the program.
Tip: You can
protect any
recording so
that the
receiver will
not record
over it
without
askin g you
first. Just
select Protect
Recording on
the C reate an
Event Timer
menu.