User manual

Page 29
TV and VCR Connections
Page 29
TV and VCR Connections
Use the following diagram and instructions to connect the satellite receiver
to a TV and VCR (optional).
TV Set Out to a TV - Connect a coaxial cable between the TV
S
ET OUT on the receive r an the TV’s input. Be sure to se t the
CHANNEL 3 /4 switch on the r eceiver to the channel you use to
watch satellite TV.
TV Set Out to a VCR (Optional) - Connect a coaxial cable
between the TV S
ET OUT on the receiver and the VC R’s input.
Connect another cable between the VC R’s output and the TV’s
input. Be sure to set the C HANNEL 3/4 switches on the receiver
and VCR to the channel you use to watch satellite TV.