Programming instructions
Remote Controls - IR-to-UHF Pro Upgrade Kit 13 - 58
Compatible Receivers
The remote control/converter combination included in the IR-to-UHF Pro Upgrade kit works only with compatible DISH
Network receivers. Compatible DISH Network receivers include all models except 4000, 5000, JVC-DVHS(IRR), and
DISHPlayer 7100/7200.
Remote Control
• The 10.1 has a congurable key to provide a choice between two communication frequencies.
• The communication frequencies used by the remote in this kit are different than other DISH Network UHF Pro remote
controls, to help avoid remote conicts.
Installation Considerations
• Ensure the switch setting on the back of the converter matches the color of remote control key you are using. If you
are using the 8.1 remote control from the original kit, move the switch to the black key position.
• Use the IR extender cable to ensure IR reception from the converter to the receiver.
• If you are experiencing interference from other sources and you're using a 10.1 remote control, try the other frequency
by ipping the key to the other side and moving the converter switch.
• Because of the remote’s unique frequencies, the converter must be used to operate a compatible DISH Network
receiver—the remotes cannot be used alone.
• Although the 10.1 remote looks like a 6.3 remote, it does not have the easy Limited Mode programming option, the A/B
band switch or the increased code database.
For more information: IR-to-UHF Pro Upgrade Kit User's Guide.