Programming instructions

Remote Controls - UHF/UHF Pro Remote Control Reception Tips 13 - 55
4. USB Port
• If an external device is connected to the USB port on the receiver’s rear panel, try plugging the device into the front-
panel USB port instead
– Make sure the IR sensor on the front of the receiver is not blocked
5. Customer Education
– Educate the customer on the actions you have taken to improve their Remote Control’s operation
– Inform the customer that the interference could re-occur if they rearrange the devices
6. If none of these actions corrects the problem, refer to your manager.
Remote Control Technology By Receiver
Features ViP211,
ViP211k,
301, 311, 411
TV1 TV2 ViP 612,
811, 921
501, 508,
510, 721
ViP222, ViP222k, ViP622,
ViP722, ViP722k, 322,
522/625, 942
ViP222, ViP222k, ViP622,
ViP722, ViP722k, 322,
522/625, 942
Receives IR Yes Yes No*** Yes Yes
Receives UHF No No No No Yes
Receives UHF Pro No* Yes* * Yes Yes No
*The IR-to-UHF Pro Upgrade Kit can be purchased to provide remote control operation from a distance.
**TV1 can be controlled by UHF Pro when using the applicable replacement remote control with the correct TV1 UHF Pro key installed.
***TV2 can be controlled by IR when a TV2 IR Converter is used.