Programming instructions

Remote Controls - Remote Control Programming 13 - 42
Using the System Wizard (Continued)
Remote and Receiver Backup
1. Access the System Wizard
2. Remote pairing screen will appear.
3. Select Advanced, the options screen will appear.
4. Select “Back up my settings”.
5. Select Next, the back up options screen will appear.
6. Select Full System Backup. This screen also has
“Back up receiver settings” or “Back up remote
settings”.
7. Select Next, the progress screen will appear. If
there are any problems a pop up will appear with
suggestions on how to resolve errors.
8. The Complete screen will appear.
9. Select Continue to return to programming.
Remote or Receiver Restoration
1. Access the System Wizard.
2. On the Warning Screen that appears, select
Continue.
3. A screen will appear with instructions on how to
proceed. Select Continue.
4. A transferring data message will appear.
5. A screen summarizing the settings to be changed will
appear, select Continue.
6. A progress bar and screen indicating that the settings
are being transferred displays. If there are any
problems a pop up will appear with suggestions on
how to resolve errors.
7. After settings are transferred, a Setup is complete
screen will appear, from here select Continue to exit
out to programming.