Programming instructions

Remote Controls - Remote Control Programming 13 - 33
Upgrading TV1 IR to UHF Pro (Continued)
For ViP 222k and ViP 722k
Through the System Information screen:
1. Purchase a replacement remote control
a. For the ViP 222k and ViP722k use the 21.0 kit.
2. Flip the key to TV1.
3. Change the switch in the battery compartment to UHF.
4. Access the System Info screen via the front panel button.
5. (Optional) Address the remote to the preferred remote address
6. Press RECORD
7. Conrm the address entered is displayed on screen and TV1 now shows UHF Pro.
Using the Wizard:
1. Purchase a replacement remote control
a. For the ViP 222k and ViP722k use the 21.0 kit.
2. Flip the key to TV1.
3. Change the switch in the battery compartment to UHF.
4. (Optional) Address the remote to the preferred remote address
5. Hold down the 0 button until the Wizard appears.
6. Follow the on screen instructions.