Programming instructions

Remote Controls - Remote Control Programming 13 - 32
Upgrading TV1 IR to UHF Pro (Continued)
For DISH 322, DISH Player-DVR 522, and DISH Player-DVR 625
1. Purchase a replacement remote control.
a. For the 322, use the 4.0 Kit.
b. For the 522 and 625, use the 6.3 Kit.
2. Locate the key/side with the green UHF Pro logo and green 1.
3. Remove the battery cover, remove the blue 2 UHF Pro key from the replacement remote control, and then insert the green key.
4. Use the original TV1 remote to open the TV1 UHF Pro Setup screen (MENU 6-1-8 for 322; MENU 6-1-6 for 522 and 625).
5. Select Enable, then select the System Info option to view the System Information screen.
6. IMPORTANT: Press CHANNEL UP on the original TV1 remote to highlight the TV1 remote address area.
7. Press RECORD on the replacement remote control. The Primary Remote Address listed in the System Information
screen will change from “IR” to “UHF Pro” (or “UHF Pro and IR”).
For More Information
• 3.0, 3.1, 3.2 & 4.0 Replacement Remote Control Kit User's Guide
• 6.3 or 6.4 Replacement Remote Control Kit User's Guide
• Replacement Remote Control Selection Guide
Kit Part Number Information
• 4.0 Replacement Remote Control Kit, 128579
• 6.3 Replacement Remote Control Kit, 149714
(or 6.4 Replacement Remote Control Kit (late 2008), 156926)