User guide

lPage 91
Alternate Legacy Wiring Diagrams
TWO DISHES,ONE 500 TWIN,ONE DUAL LNBF, TWO RECEIVERS,TWO
SW21 MULTI-DISH SWITCHES,TWO RECEIVERS
This diagram omits grounding for clarity. Make sure to
ground the system in accordance with the National
Electrical Code (NEC) and all local electrical codes. See
Grounding the System on page 94 for guidance on
grounding.
When you set up your system following this diagram and run Check
Switch,theInstallation Summary screen should similar to the one shown
below.
DISH 300
61.5 or 148 West
DISH 500
110/119 West
Dual Output LNBF
to
Receiver
to
Receiver
500 Twin LNBF
Note: Each cable
carries both the
119 and 110 signals,
once you have run
Check Switch on
each receiver.