Specifications

BUTTONS
POWER: Provides power to the NOMAD Controller.
FIND: Pressing the FIND button causes the Mount to automatically begin
searching for your system’s primary satellite. This search continues until
the Mount has locked onto the satellite and peaked for highest signal
strength.
Pressing the FIND button after you have locked onto a satellite will control
one of two functions, depending on your system type:
- Non-Skewable, Single-LNB Mount: Pressing the FIND button while on
satellite enables you to toggle between multiple satellites. Pressing the
FIND button while locked onto a satellite will direct the system to go to the
next satellite in order such as:
 •DIRECTV
©
can toggle between 101 and 119.
 •Dish Network
©
can toggle between satellites 110 119 and 129.
 •Dish Network
©
International East can toggle between satellites
61.5, 110, and 119.
 •Dish Network
©
International West can toggle between satellites
110, 119 and 148.
 •Bell ExpressVu
©
can toggle between satellites 82 and 91.
- Skewable, Multi-LNB Mount: Pressing the FIND Button will locate all
satellites available with your LNB configuration simultaneously, and re-
peak the dish for higher signal quality. For Programming Options and their
assigned satellites, see “NOMAD Programming Options” on page 11.
STOW: Pressing this button returns the dish to its stowed or travel
position.
NOMAD FRONT PANEL
Your NOMAD features simple, push-button control of the Mount, along with
LED visual indicators that allow you to to see the Mount’s status at a glance.
Here is a brief overview of the NOMAD Front Panel.
POWER BUTTON FIND BUTTON STOW BUTTON
16