SD300N Main Performance Parameters (Standard Configuration) Total Operating Mass : 16,500 KG Max. Traction Force : 164 KN Rated Load : 5,000 KG Max. Dump Height : 3,027 mm Rated Power : 162 KW Min. Turning Radius(at bucket edge) : 6,680 mm Rated Bucket Capacity : 2.7 ~ 4.0 Overall Dimensions (Length X Width X Height) : 7,780 X 2,992 X 3,470 mm Max. Breakout Force : 164 KN https://www.tractormanualpdf.
The most efficient expert in loose bulk materials transfer! SD300N Key features Integrated with 40 years of international standard professional loader manufacturing technologies, Little Giant is suitable for Emerging countries’s working conditions. MAIN PERFORMANCE FEATURES • The Weichai Steyr low-RPM engine features an oil pump that has accepted professional test bench special adjustment, making engine acceleration performance much higher than industry level.
High Efficiency, Energy Saving SD300N Smart Shape, Giant Strength “ DISD – A Pioneer of Low-RPM Engine Matching Technology!” Perfect Match between Power and Speed, Unrivalled Work Efficiency in the Industry Engine Turbo Charged With 162KW rated power and 2,000 rpm rated rotation, the Weichai Steyr WD10G220E23 engine has been adjusted on the basis of condition subdivision, enabling lower fuel consumption in the most commonly used operating states.
Reliability SD300N Low Oil Temperature for High Quality Greater Reliability Ensured by Efficient Cooling, 24 Hours Continuous Work under 45°C Environment without Risk of Overheating Other loaders Working device oil Coolant Transmission system Cooing System Working device oil By improving the cooling system’s layout and materials, DISD`s unique patented cooling technology greatly reduces hydraulic oil temperature and Coolant temperature during the machine’s operation time, thus resolving the high temp
Comfort SD300N Technology that Respects Human Health and Safety The whole system comes with a standard integrated driving system that respects human health and safety, relieves fatigue, and improves work efficiency. The upgraded SD300N model guides operations, improves work efficiency, relieves fatigue, and is operated more comfortably and easily.
Maintenance Convenience SD300N Professional and Technical Services for Customers All-metal hood, greater durability Easier Replacement The use of quick-change brake discs allows the user to check brake pads for excessive wear at any time and change the brake pads more easily without needing to remove the tires. Both sides of the hood can be side-opened.
Specification SD300N SD 30 0N a2 45° 斗山工程机械( 山东) 有限公司 山东省烟台市牟平经济开发区新城大街1 0 8 8 号 D L 5 0 1 轮式装载机 额定载重量 发动机功率 工作质量 3 0 0 0 k g （k g ） 9 2 k W / 2 2 0 发动机型号 0 r p m W P 6 G 1 2 5 E 2 2 长x 宽x 高 （m m ） 车 架 号 生产日期 最高设计车速 3 6 （k m / h ） 生产编号 液 压 油 箱 K1044226 HYDRAULIC OIL 注 意：请 按 规 定 加 注 液 压 油 Attention:Make sure to fill 温度 ≥ -5°C: L-HM46 温度 -5°C～ -30°C: L-HV46 温度 < -30°C: L-HS46 TANK the required oil T e m p e r ≥a-5°C: t u L-HM46 re T e m p e r -5°C a t～ u -30°C: r e L-HV46 T e m p e r
Specification SD300N General parameters Transmission system 2.7 m3 Bucket capacity Operating weight 16,500 KG Twin turbo Torque converter Gear box Noise Gear pump Pump type Pump displacement Planetary gear Multiple disc Anti-shock power Rated load 5,000 KG shift clutch shift Wheelbase 2,900 mm Gear position I II Lifting Dumping Lowering Total Tread 2,174 mm Forward 1-12.2 km/hr 0-38 km/hr 5.5 s 1.2 s 2.8 s 9.5 s 480 mm Backward 0-16.
Materials and Specifications in the catalogue are subject to change without notice. DIPBE-02-2111 https://www.tractormanualpdf.
