Installation Guide
4
discoverbattery.com
2.2 LYNK Edge Cards
LYNK Edge Cards come in specic shapes and will only t into the specied slot type.
• Slot 0 type will only work in LYNK Slot 0.
• Slot 1 type will only work in LYNK Slot 1.
• Universal type will work in either LYNK Slot 1 or 0.
▲ NOTE
• The LYNK Edge Card type to be used is determine by
the brand of power conversion equipment.
• LYNK Edge Cards are sold separately.
3. Installation
Choose a clean, dry, easily accessible indoor location. All the communication ports on the LYNK are accessible from the bottom
of the device when mounted on a wall or DIN rail. Clearance of at least 50 mm (2 inches) below the device is needed to allow for
the bend radius of cables connected to LYNK.
3.1 Edge Card Installation
With LYNK disconnected from all devices insert the LYNK Edge Card in the correct slot. Ensure it is rmly seated into the
internal connecting slot. Replace covers after mounting LYNK Edge Card.
▲ NOTE
• If LYNK Edge Card is in the wrong slot, it will not function.
• If LYNK Edge Card is not rmly seated, it will not function.
Universal Type
Slot 1 Type
Slot 0 Type
Slot 1 Type
Slot 0 Type
Preliminary 20190314