Installation Guide

2
discoverbattery.com
1. Safety
1.1 Warnings, Cautions and Notes
▲ WARNING
Death or Injury
▲ CAUTION
Equipment Damage
▲ NOTE
Additional Information
1.2 General Warnings
▲ WARNING
HAZARD OF ELECTRICAL SHOCK AND FIRE
• Connect only to Safety Extra Low Voltage (SELV) circuits
and power sources.
• All wiring must be completed by qualied personnel to
ensure compliance with applicable installation codes
and regulations.
Failure to follow these instructions will result in death or serious injury.
▲ CAUTION
HAZARD OF EQUIPMENT DAMAGE
• Do not install LYNK outdoors.
• Do not connect any port of the LYNK to a network
with power over Ethernet (POE) or to a public
telecommunication network.
• Do not run CAT5 cables or other cables connected
to LYNK through conduit that could be exposed to
lightning strikes.
Failure to follow these instructions wil damage equipment.
2. Overview
LYNK communication gateway unlocks the full potential of a Discover AES LiFePO
4
Battery by enabling the internal Battery
Management System (BMS) to optimize the charge and discharge congurations of the world’s best residential inverter
chargers and solar charge controller systems.
LYNK provides closed-loop communications for adaptive interaction between the Discover AES battery and power conversion
electronics turning a good system into a great one with up to 25% improvement in 0% to 100% SoC recharge time.
LYNK enables remote display and reporting of battery system-level status through supported third party web portal and cloud
monitoring services.
Preliminary 20190314