Installation Guide

12
Electrical Specications
Nominal Voltage 25.6 V
Charge Voltage 27.2 V
Maximum Voltage 29.2 V
Minimum Voltage 20 V
Nominal Capacity 110 Ah
Nominal Energy 2816 Wh
Max Continuous Charge Current 110 Adc
Max Continuous Discharge Current 110 Adc
Fuse
150 A Internal Fuse.
Provides backup over-
current protection
Cell Chemistry
LiFePO
4
Cell Modules 8S 22P
Self-Discharge 25°C / 77°F < 3% per month (battery
off)
Fault Limits
Over Temperature - Discharge Protection > 60°C/140°F for 120s
Over Temperature - Charge Protection > 60°C/140°F for 120s
Low Temperature - Discharge Protection < -20°C/-4°F for 120s
Low Temperature - Charge Protection < -20°C/-4°F for 120s
Over Voltage Protection
> 3.7 V in any cell module
for 60s
Under Voltage Protection
< 2.5 V in any cell module
for 5s
Over Current Protection > 150 Adc
Mechanical Specications
Battery Dimensions (HxWxD) 276 x 347.5 x 329.5 mm
Battery Weight 40 kg
Shipping Dimensions (HxWxD) 470 x 430 x 390 mm
Shipping Weight 48.4 kg
Terminal M8
Terminal Hardware
M8 Stainless Steel Bolt,
Flat Washer, Lock Washer
(Supplied)
Terminal Torque 9.0 Nm +/- 3
Case Material
Powder Coated Cold
Rolled Steel
Enclosure IP Rating IP 55
Charge Temperature Range 0°C/45°C (32°F/113°F)
Discharge Temperature Range -20°C/50°C (-4°F/122°F)
Storage Temperature Range -20°C/45°C (-4°F/113°F)
Pin 3 AEBus CAN GND
Pin 4 AEBus CAN Low
Pin 5 AEBus CAN High
Pin 6 AEBus + 5V
Operational Specications
Battery Management System (BMS) Integrated, with Solid State
Relay (SSR)
Cell Balancing Passive balancing when
Cell Voltage > 3.35 V
Non-Volatile Memory Yes
Lifetime Logged Data • Time
• High/low average cell
module voltage
• Balancing, Fault and
Relay State
• Battery SOC, Current,
Voltage, Temperature
• Charge Energy In/Out
Communication Ports • Isolated USB
• Isolated CAN (AEBus)
• Isolated XANBUS
Communication Connectors USB Type A Female
RJ45 Jack x2
RJ45 AEBus
12. 44-24-2800 TECHNICAL SPECIFICATIONS
Regulatory Approvals
UN 38.3, IEC 62133,
UL 2271, UL 1973