T Reflex Tower Duplicators Instruction Guide Reflex4 ReflexPro4 T Reflex7 ReflexPro7 www.discmakers.
Table of Contents Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Reflex Quick Start Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ReflexPro Quick Start Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Functions . . . . . . . . . . . . . . . . . . . . . . . . . .
Need blank media or supplies? We carry a complete line of name brand blank CD-Rs and DVD-Rs, including our own Disc Makers premium brand. We also have an extensive line of packaging and mailing supplies, as well as peripherals for your CD-R duplication system. For the latest product line and lowest prices, shop securely online at www.discmarket.com, or call 1-888-800-4041. Technical support Disc Makers backs your purchase with free lifetime technical support. Tech support hours are from 9:00 a.m.
Disc Makers’ Reflex tower duplicators are designed to provide you with production-level CD duplication capability combined with an easy user interface, simple installation, and fast throughput. GETTING STARTED Carefully remove your new CD-R duplicator from the shipping container. Please inspect the contents and verify them against your packing slip. Be sure to report any errors in shipping immediately.
Quick Start Notes for the Reflex (without hard drive): • Power On the system by switching the button on the lower right front of the unit. You will then see the system initialize and perform a self test on the front panel LED. The LED will show DETECT DRIVES and then automatically switch to COPY < MODE. • To begin the duplication operation, load the top drive with the master disc. Load the empty writer drives with high quality blank CD-R media.
• disc will be ejected when the data is loaded to the hard drive. In case of error, the LCD will show ERROR and the master disc will be ejected automatically. • To begin the duplication operation, switch back to the COPY function by pressing the STATUS button. Load the CD writers in the system with high quality blank CD-R media. The ReflexPro will begin duplicating when all writers detect the blank media.
Copy and Compare The COPY AND COMPARE function will perform duplication and then compare the duplicated discs with the master disc or hard drive disc image. With this function, the discs that have been duplicated properly will be ejected and re-inserted again in the writers automatically for comparison to the original disc or hard drive disc image. The good discs will be ejected automatically after comparison. The failed CD discs will remain in the writers.
SUB FUNCTIONS The Sub Functions provided in the Reflex are designed to allow the user to alter and enhance the performance of the system according to their needs and applications. In the main menu, press and hold down the STATUS button for five seconds. The menu will be switched to the Sub Function menu. To return to the main Function menu and leave the Sub Function menu, go to the SETUP mode and press and hold down the STATUS button for five seconds.
CD Reader Drive The CD-ROM (Reader) drive can be selected manually. The default setting is AUTO, the Reflex will select the CD-ROM drive automatically (the top drive). If you wish to change the default Reader drive to another drive other than the top, use this setting. Press the STATUS button to change the setting and the START button to exit. CD-DA Load Speed This setting allows the user to adjust the speed at which music tracks are imported to the hard drive in the system.
Skip Read Error This setting controls error skipping during source reading. The default setting is NO. When an error is detected during the load or read in process, the duplicator will stop the read in or load and display a READ ERROR message. If the setting is YES, there will be no message shown even if there is an error in reading. You can use this function to copy source CDs with errors. Press the STATUS button to change the setting and the START button to exit.
Press once again START at END TRACK to exit. The ReflexPro will start loading those music tracks selected into the current partition of the hard drive. After loading, the master CD will be ejected automatically and the LCD will display PASS. You may change the master CD and run the EDIT function again to gather more music tracks from different master CDs. When finishing the collection, switch the function to COPY and place blank CD-R media into the CD writers for duplication.
Example 2: CD #1: All tracks CD #2: 4-6 tracks Load CD #1 normally by using the LOAD function. Any data in the current partition will be erased and replaced automatically with the tracks of this CD. Load CD #2 by using the EDIT function but keep the data currently stored in the hard drive. Do not CLEAR MASTER as described in Example 1 or you will loss the data of CD #1. Repeat the procedures described in Example 1.
TROUBLE SHOOTING If the unit does not operate with the power on: Check the connection of the power cable and power outlet. Also, check the Power Supply Fan to confirm its rotation. If an ERROR message appears on the LCD Display: Press the STATUS button to abort the operation. Check the master CD and the blank CD media to confirm their integrity. If the STATUS / START buttons do not function: The system may be busy with its current task. Also the internal controller board may have failed.
