Specifications

PowerPro II

CopyPro PowerPro II

• If label is too light increase strobe setting by 5 units and re-print, repeat this

process until proper print out occurs. Please note: if strobe setting is in above

the 15 unit range or higher and print is light, first try a lower strobe setting in

the 15 unit range and increase the strobe. In some cases a very high strobe

setting will result in too light a print, and increasing the strobe setting further

may cause the ribbon to melt or tear when printing, which may then require

cleaning the print head (see Maintenance Section for print head cleaning

information).

Black & White, or Color printing settings for Win 98

Color or Black Ribbon selection procedure:

• While in the Printer Driver Properties box

• Click Graphics Tab

• Note: recommended Dithering setting is the Course selection

• Click the Color button

• Select following:

• If black ribbon is installed in printer select: Black and White only

• If color ribbon is installed in printer select: Color without image matching

Black &

White

for

black

ribbon

Color

for color

ribbon