Setup guide

EliteMicro Setup Guide
Customer Minimum Hardware and Software Requirements
Desktop systems change rapidly and the EliteMicro was designed for use with PC systems
that are relatively new models. It is recommended that you operate your new EliteMicro with
the best possible hardware. This will ensure you a recording and printing system that will
operate smoothly and efficiently.
The following are minimum requirements for the PC to which the EliteMicro is to be
connected. These are very important. Due to the high speed of the Writer, sufficient memory
and FAST hard drives are required.
Minimum PC Requirements:
 1.6 GHz Celeron® Processor or equivalent
 256 MB RAM
 7200 RPM 20 GB Hard drive (CDR) with 50% free space
 7200 RPM 40GB (DVDR) with 70% free space
 Available External Com Port (for RS232 to autoloader)
 Available USB 2.0 Port *
 Available Parallel Port (for CD printer)
Software Requirements:
 Windows 2000 or Windows XP
* CAUTION: Use only with a USB 2.0 port. The use of USB 1.1 will dramatically reduce
performance.
If Windows displays a message that a fast USB device is detected on a slow USB port, then
you need to upgrade your computer by adding a USB 2.0 port.
8