Setup guide

EliteMicro Setup Guide
Below Copies is an option called Method. The “slider bar” allows you to select your
recording speed. By default, the slider will be all the way to the right, which is the fastest
speed possible. The maximum possible speed will depend upon the model of recorder in
your unit and the type of media you are using. If your first job is a data CD, select 24X as
your speed by sliding the bar to the left. If you are duplicating an audio CD, choose 16X as
your speed. If you are copying a DVD, select 2X as your speed. Once you successfully
complete your first job, you can try to burn at higher speeds. Results will vary depending on
which brand and type of media you use. Nearly all the CDR and DVDR media on the market
today will burn at 24X and 2X respectively.
Burn Speed Selector
Once you have found a burning speed that works well with your media, you can make that
speed the default. To do this, click on the Tools menu located at the top of the DiscJuggler
window. Then click on the Options menu. Next, click on the Defaults tab if it is not already
selected. You will see the following window.
Here, you can change the default write
speed for CDs and DVDs to the speeds
that work best with your media.
28