Setup guide

EliteMicro Setup Guide
Step 7
Disabling Auto-Insert Notification for your CD ROM Drives
If your computer automatically tries to play a music CD, or launch a program when a data
CD is inserted into your CD ROM drive, then you will need to turn off your computer’s “Auto-
Run” feature. You MUST disable Auto-Run for the EliteMicro’s recorder. Otherwise, when
you insert a master CD to be copied, your computer will try to automatically play or run
whatever is on that CD.
One easy way to disable Auto-Run in Windows XP and 2000 is as follows:
Click on the Windows Start button, select Run. Type “regedit” into the space. Click OK.
You will see a screen
similar to the one at the
left. Click on
HKEY_LOCAL_MACHINE, then
SYSTEM, then Current Control Set,
and then Services.
Scroll down until you find a folder
called “CDROM” and click on it. On
the right side of the screen, you will
see an “Autorun” entry. Double-click
on the file name and a new window
will open, allowing you to change the
value from a “1” for enabled, to a “0”
for disabled. Below is a picture of
this. Click OK and close the Registry
Editor.
Reboot your computer.
24