Setup guide

EliteMicro Setup Guide
The ACC allows you to troubleshoot and
update your EliteMicro unit. If any
electrical or mechanical issues occur,
run the Diagnostics. The ACC
Diagnostic routine will test all functions
of the autoloader and provider graphical
feedback.
The Comm Port setting enables you to
chose between using COM1 and COM2
when communicating with the
EliteMicro. This choice depends upon
which of your PC’s serial ports you
plugged the EliteMicro’s serial cable
into.
! CAUTION !
This screen allows you to adjust the
position of the Picker Arm when placing
CDs in the recorder and printer. DO
NOT change these settings unless
instructed to do so by a qualified
technician
21