Setup guide

EliteMicro Setup Guide
Installation of the CD Printer
Figure 9.1
Locate the two sheet metal printer guides and
arrange as shown, remove black knob
Figure 9.2
Place the guides together as shown and then replace the
black knob, tighten securely.
Figure 9.3
Next arrange the guide as shown,
USING THE INSERTATION ANGLE INDICATED,
place the EliteMicro Recording unit into the guide.
Figure 9.4
Next insert the CD Printer as shown
USING THE INSERTATION ANGLE INDICATED,
place the CD Printer into the guide
Figure 9.5
Review your configuration and confirm it matches as shown
Figure 9.6
Review your configuration and confirm it matches as shown
Figure 9.7
Plug in CD Printer Control Cable into
the EliteMicro as shown
Figure 9.8
Plug in the CD Printer Control Cable and the parallel
Cable into the Printer as shown
13