User guide

Elite Series User Guide
3
DISC DUPLICATOR CAPABILITIES
Elite series duplicators can:
• Produce up to 175 discs from a master or an
image during a single session.
• Automatically perform a series of duplication
operations from a number of different disc
masters placed on the input spindle (referred
to as relay mode).
• Support all common CD and DVD formats,
including DVD double layer (DL).
• Perform essential tasks—such as Disc to Disc
copies and Print Label—through keyboard
hotkeys.
• Create and store a virtually unlimited library
of disc labels that can be accessed on
demand and used in combination with any
duplication project to automate printing.
POWERING ON THE DUPLICATION
SYSTEM
PRO The ElitePRO has a power switch on the
rear of the cabinet that supplies power to
the overall duplication system. There is also
a power switch for the integral computer
system inside the unit on the left side of the
cabinet and a separate power switch for the
printer.
To power on the duplication system
1 Ensure that the power cables are properly
connected to the duplication system cabinet
and that the separate printer power cable is
connected.
2 Turn the power switch at the rear of the cabi-
net on.
3 Press the power switch on the printer once. A
green light indicates power.
4 Press the power switch on the left of the cabi-
net once to power on the internal computer.
The system powers up and the Elite series
banner appears onscreen.
To power down the duplication sys-
tem
1 Exit all applications, including FlexWare.
2 Select Turn Off Computer from the Windows
Start menu.
3 Click the Turn Off button in the dialog box
that appears. The internal computer system
powers down.
4 Press the printer power button once to turn
off printer power. The green light goes out.
Optionally, when you have powered down the
system and printer, you can turn off the power
switch on the rear of the cabinet. This shuts down
power to all the components in the cabinet,
except for the printer, which uses its own separate
power input.
Note: The system will not power down with
FlexWare tasks running. Always exit FlexWare
before powering down.
Elite_Series_User_Guide_lp03.indd 3 2/21/06 9:05:52 AM