User guide
Using Utilities
24
4 Press the lower button on front of the printer
cabinet to extend the tray.
5 Clean the surface with a lint-free cloth.
6 Press the button again to close the printer
tray.
Note: Avoid using any harsh cleaners or abrasive
materials on the drive trays. A cloth moistened
with a mild soap solution can be used for stronger
cleaning as long as the surface is dried thoroughly
and no moisture is allowed to enter the interior of
the drive.
REPLACING THE PRINTER FILTER
The filter on the back of the printer cabinet
should be replaced after every 2000 disc print
-
ings. We recommend that you keep additional
filters available and maintain a log so that you will
know when it is time to replace the filter.
To replace the printer filer
1 Turn off power to all equipment.
2 Remove the plastic filter housing from the
back of the printer cabinet by gently prying it
away from the enclosure.
3 Remove and dispose of the old filter.
4 Insert a fresh filter into the filter housing and
snap the housing back into place on the
printer cabinet.
The Disc Makers ordering information for this
item is:
Printer Dry Ink Filter, Part number 21202
Note: A clogged filter can impede air circulation
to the printer and lead to printer problems and
overheating. Replace the filter regularly to avoid
difficulties.
KEEPING THE DUPLICATOR RUN-
NING WELL
Elite series duplicators require minimal mainte-
nance and operate efficiently for many years if
you follow a few basic guidelines.
• Keep the duplicator clean and use it within
normal office temperature ranges to ensure
optimal operation. This equipment is not
designed for heavy industrial use in an
environment such as a factory floor, machine
shop, or other setting where it could be
exposed to excess particulates or airborne
contaminates. A small, battery-powered
vacuum cleaner designed for computer
system use can be used to clear fan openings
and ventilation slots, as well as the pick arm
and duplicator cabinet.
• While Elite series duplicators are rugged and
durable, for trouble-free duplication they
should be set up on a solid operating surface
away from potential sources of shock and
vibration.
• We recommend the use of an Uninterruptible
Power Supply (UPS) with built-in surge
protection to isolate the duplicator from
varying voltage levels and power outages.
For best results, use a UPS unit with the
capacity to handle the computer system,
printer, and monitor.
• Operate your Elite series duplicator away
from strong electrical fields, such as those
generated by copy machines, industrial
vacuum cleaners, or refrigerators.
• Avoid operating your Elite series duplicator
near bright sunlight or very bright indoor
lighting. Optical sensors may not be able to
control robotic movements if the ambient
light sources are too bright.
Elite_Series_User_Guide_lp03.indd 24 2/21/06 9:06:04 AM