User guide

Elite Series User Guide
13
you may want to experiment with smaller cache
sizes.
To set the cache size
1 Select the Cache option on the Settings
menu.
2 Choose a cache size (or No Cache) by select-
ing one of the available settings. A check
mark appears beside your selection and the
new value is immediately applied.
CHOOSING A BURN SETTING
Under the Settings menu, FlexWare gives you
the option to select a technique for controlling
the burn technique used during duplication: Burn
Safe or Burn Smart.
• The Burn Safe option uses conservative
settings to minimize the chances of discs
being improperly recorded so that they must
be discarded. Select this option if you are
using older media or if you want to ensure
error-free recording of an important project.
• The Burn Smart option makes intelligent
decisions based on the detected media
qualities and current system values to burn
discs as rapidly as possible. Use this setting
if you want to reduce the overall time of the
duplication operation.
VIEWING THE LOG
FlexWare maintains a log of each event that takes
place while the program is running. Viewing this
log can be helpful to determine if duplication
jobs were performed as expected or if problems
were encountered that caused a job to pause or
stop.
To view the log
1 Select the Log item on the Settings menu.
2 FlexWare displays a copy of the current log in
the Windows Notepad application.
3 Print or save the log if you want to refer to
it later or maintain an ongoing record of
events.
Elite_Series_User_Guide_lp03.indd 13 2/21/06 9:05:57 AM