User guide

Elite Series User Guide
9
that minimizes disc errors for improved audio
fidelity on CDs.
• Make any custom settings using the options
under Advanced, if required. The Advanced
settings let you determine if each copied
disc will be verified and also let you perform
a Test Write or Test Print operation before
initiating the full-scale duplication.
• RAW write performs a bit-by-bit copy
operation without enabling error correction.
• R-W (CD+G) lets you copy discs in Karaoke
format.
• The TAO (Track at Once) write setting
enables audio discs to be written a track at
a time (as compared to Disc at Once, which
involves a continuous, uninterrupted write
operation).
8 Click the arrow beside the Write Speed op-
tions to start the job. FlexWare displays the
progress of the individual tasks in the Event
Log window. The program first reads the
disc, creates a working image, unloads the
master, puts a blank disc in the drive tray and
begins the write operation.
9 If FlexWare detects bad media during the
write, the media will be automatically un-
loaded from the drive and deposited in the
reject area on the platform below the drives.
10 Select Save As at the end of the copy to
store the details of the disc-to-disc copy
operation. Assign a name to the job and
choose a storage location. If you use the de-
fault Jobs file, FlexWare will display the job
under Saved Projects list for quick access.
DUPLICATING MULTIPLE MASTERS
A feature of FlexWare known as relay mode lets
you perform a series of disc to disc copies from
multiple masters inserted on the input spindle. To
do this, you interleave the masters with the num-
ber of blank discs (underneath each master) that
you want to duplicate. With the number of copies
set to Auto, FlexWare will work through the stack,
select each new master, and perform as many
copies of it as there are blank discs until it detects
the next master.
Note: You cannot mix CD and DVD masters in this
type of operation; all master discs (and corre-
sponding blanks) must be either CDs or DVDs.
To create duplicates in relay mode
1 Load the input spindle with a combination of
blank discs and masters. Underneath each
master you should place the number of cop-
ies of that master that you want recorded.
For example, if you want 8 copies of a par-
ticular master, place 8 blank discs in the input
spindle and place the master on top of them.
2 For the next master to be duplicated, place
the appropriate number of blank discs on
top of the previous master. Then, place the
second master on the top of the blank discs.
3 Continue in this manner until you have
loaded the input spindle with the combina-
tion of masters and blanks needed for the
operation. You can load as many masters and
blanks as required up to the 175 disc capac
-
ity of the input spindle.
4 Remove any discs present in the drive trays.
5 Select Duplicate Disc from Disc in FlexWare.
6 Choose Auto for the Read Speed, unless you
have more specific requirements.
Elite_Series_User_Guide_lp03.indd 9 2/21/06 9:05:55 AM