Setup guide

T www.discmakers.com 1-888-800-4041 12
Installation of the CD Printer
Figure 9.1
Locate the two sheet metal printer guides and
arrange as shown, remove black knob.
Figure 9.3
Next arrange the guide as shown, USING THE
INSERTION ANGLE INDICATED, place the
EliteMicro Recording unit into the guide.
Figure 9.5
Review your configuration and confirm it matches
as shown.
Figure 9.7
Plug CD Printer Control Cable into the EliteMicro
as shown.
Figure 9.2
Place the guides together as shown and then
replace the black knob, tighten securely.
Figure 9.4
Next insert the CD Printer as shown USING THE
INSERTION ANGLE INDICATED, place the CD
Printer into the guide.
Figure 9.6
Review your configuration and confirm it matches
as shown.
Figure 9.8
Plug the CD Printer Control Cable and the paral-
lel Cable into the Printer as shown