User guide

User Guide v.1.0 www.discmakers.com/techsupport 8
for job A) the autoloader will load entire content of this disc(Master A) into the reserve partition on the Hard Drive.
The subsequent discs from the input bin/spindle will be loaded in the empty drives.
Once the loading process is completed, the autoloader will start the duplication process for the blank media in the
remaining drives. Master disc A will be picked up from the appropriate drive and dropped on to the Output Spindle
and the empty drive where the master disc was removed will be loaded with the next disc from the input bin. If a
new master is detected before the previous job is finished, the autoloader will complete the first job, unload the
completed job, and fill the drive trays with blank discs for the next job.
The robotic arm will continue to load media into the drives as the duplicated discs are placed in the Output
Spindle. Once the writer drive detects another Master disc, the same process is repeated for the new Master disc.
5. Setting Counters and Assigning Names
Two frequently used tasks are setting counters and assigning names to partitions. Directions for these tasks
are given here.
5.1 Setting Counters
The autoloader frequently gives you the option to set a counter so that the machine can keep track of the
number of copies made. Follow these steps when you see a Counter Selection Menu:
The Counter Selection Menu lets you set how many copies you want to
make for your project. The Counter Selection feature tells the autoloader to
count the number of successful copies you have made and stop the job
when the desired number of copies has been reached.
You can select “No Counter” if you prefer to copy continuously with no interruption. (It will still count the number
of copies, but it will not notify you when to stop.) To select the “No Counter”
simply press the Enter button
when you see the screen above.
Or, you can select Specify Counter between 1 to 9999 by pressing the Up or Down button to go to the
Specify Counter menu:
Press the Enter button to select this option. You will see the next Specify
Counter menu.
To specify the number of copies
for your project, you need to
enter/input a four-digit number.
If you need to specify a number that is less than four digits, fill the leading spaces with zeros (any leading zeros
will be skipped). Examples of four-digit numbers are 0234 (two hundred and thirty four), or 0010 (ten).