User guide

User Guide v.1.0 www.discmakers.com/techsupport 6
7. Screen Saver
Use this setting to enable or disable the Screen Saver feature. When this is enabled, a screen
saver is displayed whenever your autoloader has been idle for a long period of time.
8. Counter
Use the Counter menu to enable or disable the Counter feature. The counter tells you how many
discs have been copied and how many discs are left to go during the progress and it will stop the
job once the desired number of copies has been made.
9. DVD+R High Compatibility Mode
This feature allows you to turn the DVD+R High Compatibility Mode feature ON or OFF. The
purpose of this feature is to increase the compatibility of DVD+R media with a broader range of
DVD Video players.
10. ISRC
If your master Audio CD contains ISRC codes and you would like them to copy to your duplicates,
enable this option.
11. Disable Drives
Use this utility to allow the system to disable certain drives/trays when certain drives/trays are
producing high failure rates. See
Disable Drives.
12. CD Overburn – (NOT RECCOMENDED)
Enabling this option will attempt to record past the traditional 700 MB limit of a CD-R, but at the
expense of increased failure rate and decreased compatibility.
12. System Utilities page 23
1. Disc Info
Use the Disc Info utility to identify the type of blank recordable media. This utility identifies your
blank recordable Media's format, capacity, manufacture ID, and the Media's certified writing
speed.
2. System Info
Use this menu option to see data about the autoloader and its resources (firmware version, RAM
and CPU).
3. Device Info
Use this menu option to see data about the drives that are installed in the autoloader.
4. Load Default
Use this menu option to reset all of the options back to the manufacturer's default values. You
can use this function if your autoloader is acting abnormally.
5. Update Firmware
Use this utility to update the software in your autoloader. To update, insert the manufacturer
s
Certified Update CD into the writer drive. Then you can press the Enter button to update.
Important: You should not upgrade your autoloader's firmware unless your system is
becoming unstable or you are advised to do so by Tech Support.
13. Loader Utilities page 24
Use the Loader Utilities menu options to access the various utilities built into the autoloader.
1. Update Loader Firmware