User guide

User Guide v.1.0 www.discmakers.com/techsupport 5
duplication. At this point, Hard Drive is the only place where the content of the master disc resides during
duplication.
8. Master Mode page 16
Use the Master Mode menu to select either Single Master Mode(SM) or Multi Master Mode (MM).
9. Erase page 16
Use the Erase RW menu to erase your Rewritable discs. There are two options:
a. Full Erase: This option erases the entire disc, destroying all previously written data in the process.
b. Quick Erase: This option erases the index (TOC) of the Rewritable disc, not the data section. It is much
faster than Full Erase. However, the data section is still recoverable. If you prefer the old content not to be
recovered for security purpose, please perform Full Erase.
10. Hard Drive Setup: page 17
Use the Hard Drive Setup menu to perform various hard drive-related operations. These options include
loading, renaming, or deleting your images.
11. Setup page 20
Use the Setup menu options to control how the autoloader operates. You can scroll between the various
options using the Up or Down button.
1. Language
Use this setting to choose the language used to navigate the autoloader. The autoloader
supports English and Spanish menus.
2. Read Error Skip
Normally, when the autoloader encounters a read error while reading the master disc, all the
duplication will be aborted and all the recordable media in the writers will be ruined. However, if
you believe that your master disc has a small, insignificant error due to physical damage, you can
enable this setting to allow the autoloader to skip any read errors that it encounters. It is ON by
default.
Important: This function does not fix the error; it only skips it to continue copying the rest of the
readable data. This function is recommended for Video and Audio duplication purposes.
3. CD Writing Mode
Use this setting to select the mode you would like use to duplicate a CD. There are two
different modes: Disc at Once and Track at Once. Disc at Once is recommended for
duplication.
4. Max Audio, VCD & CDG Speed
Due to the lack of error checking mechanism for Audio CD, Video CD and CD+G format,
duplicating them at too high a speed can cause frequent errors like glitches and skips. Use this
setting to adjust the maximum duplication speed for Audio, Video CD and CD+G format to ensure
the reliable duplication for such formats.
5. Buzzer
Use this setting to choose whether you want to hear a beep when you press a button and when a
task has been completed.
6. Startup Menu
Use this setting to choose which menu you would like to see first when you turn on the
autoloader.