User guide

User Guide v.1.0 www.discmakers.com/techsupport 18
9.1 Select Partition
The Select Partition submenu is used to select the partition on the Hard Drive that will be used as the default
partition choice for various Hard Drive related tasks.
Press the Enter button to enter the Select Partition menu.
Use the Up or Down button to select the desired partition. The
RESERVED partition is reserved for use by the System under Multi-
Master mode.
Press the Enter button to select the desired partition (named FUN in this
example).
9.2 Load Partition
The Load Partition menu is used to load a master disc s content into the desired partition on the Hard Drive.
Press the Enter button to enter the Load Partition menu.
If you would like to load the master disc into a new partition, press the
Enter button when the New Partition option is shown. Or, you can use the
Up or Down button to select one of the existing partitions to be overwritten
& press the Enter button to select it.
Depending on whether you are loading the master into a new partition, or into an existing partition, you will see
one of these two screens:
New Partition Existing Partition