User guide

User Guide v.1.0 www.discmakers.com/techsupport 15
Use the Up or Down button to find the 6. Select Burn Speed menu.
Press the Enter button on 6. Select Burn Speed menu to set the
duplication burn speed and you will see the Select Burn Speed type
menu similar to this.
There are three recording speed types that can be set:
HDD to CD: Copy Hard Drive CD Content to CD-R/RW Discs speed.
HDD to DVD: Copy Hard Drive DVD Content to DVD±R/RW Discs.
HDD to DVD DL: Copy Hard Drive DVD DL Content to DVD±R DL Discs.
Depending upon the type of duplication and your autoloader restrictions, you need to select the correct format in
order to take effect. To select the recording speed options, use the Up or Down buttons to find the desired speed
for the appropriate format and press the Enter button to enter the menu. You will see a menu similar to this:
Use the Up or Down button to find the desired speed. Press the Enter
button to set the desired recording speed.
The options that are available are shown below.
Duplication Type Speeds Available
HDD to CD
Speed
1x, 2x, 4x, 8x, 12x, 16x, 24x, 32x, 40x, 48x,
52x
HDD to DVD
Speed
1x, 2x, 2.4x, 4x, 6x, 8x, 12x, 16x , 20x
HDD to DVD DL
Speed
1x, 2x, 2.4x, 4x, 6x, 8x, 12x, 16x , 20x
These options might change depending on the CD or DVD writers pre-installed in your system.
Note: The speed that you choose may be adjusted by the drives and/or the media for optimized
duplication.
Once your selection has been changed successfully, you will see the
following screen for 2 seconds:
You will automatically be returned to the Main Menu.