Technical data

3
TABLE OF CONTENTS
Installation of the breather pipe 23
Laying of the electric control line 24
Basic planning information ....................................... 4
Location of inlet valves on the floor plan ....................4
Location of the inlet valves: height ........................... 5
Location of the central vacuum cleaner .....................5
Planning of the tubing .............................................. 5
Planning of the water vacuum system ...................... 7
Characteristics of the fittings .................................... 8
Planning of the breather pipe ................................... 8
Particular requirements of planning ......................... 9
Planning of the power mains .................................. 10
Planning 4
Definition of the material needed for the tubing ....... 12
Choice of the inlet valves and
of the electricity plates ........................................... 12
Choice of the cleaning accessories ....................... 16
Approximate calculation of labor for the complete
installation of the system ........................................ 16
Choice of the central vacuum cleaner .................... 16
List of optional for mod. DS Super Compact ........... 19
List of optional for mod. Ds Modular range ............ 19
Technical data of the central units .......................... 19
Calculation of the materials/Cost-estimate 12
General instructions ............................................... 21
Laying of the tubing ................................................ 21
Laying and connection of
the water vacuum system ....................................... 22
Laying of the backup boxes .................................... 23
Making of the piping 21
Location of losses .................................................. 26
Testing 25
Installation and connection of the inlet valves .......... 27
Installation and connection of the central vacuum cleaner 28
Check of the functioning of the by-pass
valve on the dust separator .................................... 31
By-pass valves adjustment ..................................... 31
Testing of the inlet valves ....................................... 32
Final testing of the system ..................................... 32
Delivery of the finished system to the customer ..... 32
Certification ............................................................ 35
Installation and connection of the inlet valves and of
the central vacuum cleaner
27