Datasheet

QG series
© DIS Sensors - Oostergracht 40 - 3763 LZ SOEST - The Netherlands www.dis-sensors.com Subject to change without notice Page 2 2015-10-13
QG40N-KAXYZh-1,5-AI-PT
Transfer characteristic
Iout = 12 + 5.33*g [mA]
Clipping outside measuring range
QG40N-KAXYZh-1,5-AI-PT
Measurement orientation
The default zero position is when the
sensor is mounted horizontally and
no acceleration is applied.
Z-axis compensated for 1g gravity.
QG40N-KAXYZh-1,5-AI-PT
Connectivity (length ±10%)
Connection
2 m PUR/TPE Li12y11y, black Ø 5,4 mm, wires: 6x0,34 mm² DIN colors
Wire / pin coding
White
Brown
Green
Yellow
Grey
Pink
(Blue)
(Red)
Zeroing
+ Supply Voltage
GND
Output X
Output Y
Output Z
(nc)
(nc)
QG40N-KAXYZh-1,5-AI-PT
Mechanical dimensions (indicative only)
QG40N-KAXYZh-1,5-AI-PT
Zero function
Zeroing should be done within 1 min. after power up.
After zeroing you've 1 min. left for another centering.
Normally the zero input should be left unconnected.
Connect zero input to ground for more than 0,5s