Instructions / Assembly

Storage

Drain the fuel tank in a well-ventilated area

away from ignition sources. If the engine is

hot from use, shut the engine o and wait

for it to cool before draining fuel.

Do not smoke near the fuel tank.

1. Wait for the engine to cool, then clean the engine with a

clean cloth.

2. When the water pump is to be stored for longer than 20

days, prepare the engine for storage by emptying the fuel

tank and draining all fuel lines.

3. Remove the drain bolt from the bottom of the carburetor

bowl and allow the fuel to drain.

4. Clean out area around spark plug and remove. Pour

one tablespoon of engine oil into the cylinder through

the spark plug hole. Reinstall the spark plug, but leave

the spark plug wire disconnected. Pull recoil starter

handle to distribute oil in the cylinder. Stop after one

or two revolutions when you feel the piston start the

compression stroke (when you start to feel resistance).

5. Apply a thin coat of rust preventive oil to all uncoated

metal parts.

6. Cover and store in a dry, well-ventilated area out of reach

of children and away from water heaters, clothes dryers,

furnaces and other ignition sources.

CYLINDER

ASSEMBLY

DRAIN

PLUG

BOLT

AIR FILTER

COVER

SPARK

PLUG

WIRE

MUFFLER

WARNING