Operation Manual

9. Re-insert the fully dried loading grille into the Truman Cell®

(Fig. 13).

The loading grille clicks audibly into place as soon as t has been

inserted correctly.

10. Insert the Truman Cell

® into its console (Fig. 14/1.) with the

"TOP" marking at the top.

11. Lock the Truman Cell

® by turning both release catches 90° in the

clockwise direction (Fig. 14/2.).

12. Re-insert the pre-filter (Fig. 15).

13. Re-attach the cover panel by inserting it at the bottom first and

then firmly pushing it at the top. You will hear and feel the cover

panel click into place.

NOTE:

Make sure that the "TOP" marking on the loading grille matches

the "TOP" marking on the Truman Cell

®.