Technical data

2 Unpacking and assembling

2.3 Using further nozzles

(accessories)

Besides the floor nozzle you just attached, you may extend

the functions of your cylinder vacuum cleaner with other

nozzles.

 The supplied accessories include:

- Crevice nozzle (Fig. 5/1)

For vacuuming spots difficult to reach.

- Furniture brush (Fig. 5/2)

For cleaning delicate surfaces.

- Upholstery nozzle (Fig. 5/3)

For gentle vacuuming of upholstered furniture.

 Optionally available are:

- Turbo brush (Fig. 6/1)

For thoroughly deep cleaning of carpets with the

revolving brush head.

- parquet brush (Fig. 6/2)

For vacuuming especially delicate surfaces (e.g.

parquet, laminate) with long, soft bristles.

 This is how to attach the nozzles:

1. Switch off the vacuum cleaner and pull the plug from the

mains socket.

2. Pull off the attached nozzle.

3. Attach the desired nozzle to the bottom end of the

telescopic tube (Fig. 7/1) or if necessary directly to the

handle.

4. If possible, store nozzles no longer in use on the

accessory bracket (Fig. 1/3).

NOTE:

The brush rotating at high speed causes a loud noise

during operation.

WARNING:

Danger of injury! Only assemble the appliance if it is not

connected to the power supply. Otherwise the machine

might start up and parts of your body, hair or pieces of

clothing might be sucked in.

ATTENTION:

Use only intact nozzles. Damaged nozzles may scratch

or damage surfaces and objects.

ATTENTION:

Using the cylinder vacuum cleaner without a nozzle

attached increases the danger of accidentally sucking in

objects.

02_M7100_gb.book Seite 26 Dienstag, 8. April 2008 11:00 11