Technical data

20
4 Operation
4Operation
4.1 Setting the angle of inclination
1. Hold the appliance securely with one hand
on the handle and the other on the dust
container.
2. Slide the three-in-one switch forward
(Fig. 6/A) and with the other hand move
the appliance into the desired position.
3. Release the three-in-one switch and push
the handle gently in the opposite direction
(Fig. 6/B) until it locks into place.
4.2 Dry vacuum cleaning
1. Turn on the hand-held vacuum cleaner by
pressing the three-in-one switch (" ")
(Fig. 7/B).
2. Press the three-in-one switch (" ") again
to turn it off.
4.3 Wet vacuum cleaning
1. First empty the dust container, ZChapter
5.1, "Emptying the dust container".
2. Now attach the wet nozzle (Fig. 8/A).
3. Angle the appliance to form a 90° angle,
ZChapter 4.1, "Setting the angle of incli-
nation".
4. Turn on the hand-held vacuum cleaner by
pressing the three-in-one switch (" ").
5. As soon as the MAX mark (Fig. 8/B) has
been reached or you have finished wet
vacuuming:
- Switch off the appliance (Fig. 7/B).
- Empty the dust container, ZChapter
5.1, "Emptying the dust container".
- Clean the dust container ZChapter 5.2,
"Cleaning the dust container".
- Clean the filters, ZChapter 5.3, "Clean-
ing the filters".
5After use
B
A
A
B
AA
6
NOTE:
Depending upon requirements, for wet vac-
uum cleaning in particular, you can angle
the appliance into one of four positions.
A B
7
NOTE:
Depending upon requirements, you can
attach the crevice nozzle (Fig. 7/A) to con-
centrate the airflow of the vacuum cleaner.
WARNING:
Risk of fire or explosion! Do not vacuum up
explosive, flammable or aggressive liquids.
Only use the hand-held vacuum cleaner to
vacuum up regular domestic liquids.
AB
MAX
8
Verso.book Seite 20 Dienstag, 14. Dezember 2010 10:25 10