Operation Manual

50
6 After use
6 After use
6.1 Winding up the power
cord
1. If this has not yet been done, turn the upper cable stor-
age device clockwise through 180° right to the end.
2. Now wind the power cord around the lower and upper
cable storage devices as shown (Fig. 22).
3. Remove the micro-fibre cleaning cloth and allow to dry
or wash if required, ZChapter 6.2, “Taking care of the
micro-fibre cleaning cloth”.
WARNING:
Danger of tripping! Wind up the power cord as soon as
you have finished cleaning. Otherwise the power cord is
a tripping hazard.
22
02_M318_gb.book Seite 50 Montag, 8. Dezember 2014 9:01 21