Operation Manual

Always switch OFF the steamer when fi tting and removing the
microfi bre cleaning pads.
CAUTION
7
15
HOW TO
USE ON CARPETS
1. Place the microfi bre
pad on the fl oor
white side facing up.
Place steamer onto
pad making sure the
entire pad covers the
oorhead.
REFRESHING CARPETS
5. Place your foot on
oorhead and pull
handle backwards to
recline.
6. Move the steamer
slowly backwards
and forwards across
the carpet paying
particular attention
to high traffi c areas.
7. To release the
carpet glider, place
your foot on clip
and push down. Lift
steamer to remove.
3. Plug into mains, turn
dial to ‘ON’ position,
the amber light will
illuminate to indicate
power on.
4.Twist the steam
control dial to
desired setting.
Steam is activated
automatically. Take
care when changing
settings during
cleaning.
2. With microfi bre
pad attached, push
steamer into front
of the carpet glider,
then place back of
the fl oorhead into
the clip. The carpet
glider should only be
used when refreshing
carpets.
IMPORTANT: Take care removing carpet glider with foot. Make sure steamer is OFF and
has cooled down.
IMPORTANT: Always allow the steamer to fully cool down before removing the microfi bre
cleaning pad.