Operation Manual

12
USE THE MACHINE AS A HANDHELD
1. Push handle release
button and lift handle to
remove.
2. Press accessory release
button and lift steamer to
release fl oorhead.
3. Push concentration nozzle
into steamer until it clicks
into place.
4. Plug into mains, turn the
dial to ‘ON’ position. The
amber light will illuminate
to indicate power on. The
steamer will be ready after
approximately 30 seconds.
5. Twist the steam control dial
to desired setting.
6. To produce steam squeeze
the trigger in short bursts.
Don’t hold the trigger
continuously to prevent over
wetting.