Operation Manual

7
11
HOW TO
IMPORTANT: Never use the steamer without a cleaning pad attached to the fl oorhead.
IMPORTANT: Never leave the steamer on one spot for an extended period of time or with a damp or
wet microfi bre pad attached as this may damage the fl oor surface.
CLEAN HARD FLOORS
1. Place the microfi bre pad
on the fl oor white side facing
up. Place the fl oorhead onto
microfi bre pad making sure
the microfi bre pad covers the
entire fl oorhead.
2. Plug into mains, turn dial
to ‘ON’; the amber light will
illuminate to indicate power
on. The steamer will be ready
after approximately
30 seconds.
3. To steam your fl oors twist
the steam control dial to
desired setting. Steam is
activated automatically. Take
care when changing settings
during cleaning.
4. Place foot onto the
oorhead and pull handle
backwards to recline.
5. Move the steamer slowly
backwards and forwards
across the fl oor paying
particular attention to high
traffi c areas.
6. Turn dial to ‘OFF’ position
and allow steamer to cool,
the amber light will switch off.
Hold corner of pad down with
your foot and lift steamer to
peel away.
TIP: Product needs to be
assembled after fi lling the tank.
Attach the fl oorhead and handle
before cleaning fl oors.