Cordless 2-in-1 Handstick Vacuum USER GUIDE DDH01-E01/DDH01-E02
Warning BASIC SAFETY PRECAUTIONS • This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. • It is a battery-operated appliance, the battery being charged outside the appliance. • Only use the vacuum cleaner indoors and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing from moving parts and openings whilst using the vacuum cleaner.
Warning DON'TS CONTINUED • Don’t use the vacuum cleaner with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label. • Don’t vacuum up hot coals, cigarette butts, matches or smoking hot burning items or use in an area where there may be harmful fluids (chlorine, bleach, and ammonia drain cleaner). DO'S • Always make sure the filter and dirt container are fitted correctly before using your vacuum cleaner.
Hi. Welcome. Congrats on purchasing your new Cordless 2-in-1 vacuum. Inside, you’ll find everything you want to know from tools to how to. So what are you waiting for? LET’S GO.™ Taking care of your carpets and hard floors The Cordless 2-in-1 is designed to make vacuuming carpets and hard floors regularly, as effectiveand efficient as possible and this user guide will help you get the most out of your machine.
Table of contents Let's talk safety 2 Getting to know your machine 6 Getting started 8 Using your machine 9 Taking care of your machine 11 Let’s talk technical 14 Accessories 16 Troubleshooting 17 Guarantee 18 Notes 19 5
On/Off switch Suction control button Machine charging port 2-in-1 tool holder Handheld release button Handheld On/Off button Dirt container release button Floorhead release button Charging point Floorhead 6
Product 1 - DDH01-E02 Battery voltage - 14.4v Run time - 15mins Charge time - 10hours Weight - 2.7kg Dust bin capacity - 0.5l Part number - 6-1-136559-00 Product 2 - DDH01-E01 Battery voltage - 18v Run time - 17mins Charge time - 10hours Weight - 2.7kg Dust bin capacity - 0.
CAUTION Please read 'Lets talk safety' at the beginning before use. Assembling your 2-in-1 vacuum cleaner 1. Line up floorhead with main body, push firmly into place. 2. Line up handle with main body and lower into place. 3. Insert screw into back of the handle and tighten with a cross head screwdriver until handle is secured into place. CHARGING your 2-in-1 vacuum cleaner NOTE: Charging will be required before first use. Initial charge requires 10 hours. 1.
NOTE: Do not use brushbar on hard floors as it may cause damage. 1. Unplug the charger from the mains and remove the vacuum from the docking station. 2. Place foot on the floorhead and pull the handle backwards to recline the machine. 3. Press the ON button on the handle to turn the machine on. 4. To select between high and low suction press the suction controller button.
CAUTION Always take extra care when cleaning stairs. Always switch the handheld off before connecting or disconnection the accessories and before returning the handheld to the main body. Operating as a handheld vacuum cleaner 1. Press the handheld release button. Lift to remove the handheld from the main body. 2. To operate press the On/Off button to switch the handheld on. 3.
EMPTYING THE DIRT CONTAINER 1. Press the handheld release button. Lift to remove the handheld from the main body. 2. Press the dirt container release button to remove the dirt container. 3. Squeeze tabs to remove filter and frame. 4. Hold dirt container over a bin allowing dirt/ debris to fall out. USING YOUR MACHINE / taking care of your machine CAUTION Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting. TIP: Don’t over fill the dirt container.
Cleaning the filter 1. Press the handheld release button. Lift to remove the handheld from the main body. 2. Press the dirt container release button to remove the dirt container. 3. Squeeze tabs to remove filter and frame. 4. Tap the filter over a bin to remove any dust and debris. Do not wash filter frame. 5. Pull foam filter from underneath of filter frame. Wash foam filter under running water (max 40’C). 6.
CAUTION For best performance terminals in vacuum, on handheld and on docking station must be free from dust and dirt. cleaning the terminals taking care of your machine CAUTION Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting. Do not use your vacuum cleaner without the filters in place. Using a dry cloth or soft dusting brush remove any dust or debris from terminals in vacuum, on handheldand on docking station.
clearing blockages 1. Press the handheld release button. Lift to remove the handheld from the main body. 2. Press the floorhead release button and pull floorhead to remove. 3. Remove any blockage from the main body. clearing blockages for the brushbAR If the brushbar has been obstructed, the Motor Protection Sensor may have been activated. Remove the battery and handheld and clear any obstruction from the brushbar. Wait 30 minutes for the vacuum cleaner to reset itself.
LET's TALK TECHNICAL Changing the brushbar 1. Turn the lock release to unlock the floorhead cover. Lift and remove floorhead cover. 2. Remove brushbar lifting side of brushbar not connected to belt. Unhook other side of brushbar from belt. 3. Loop the belt over the brushbar. Replace the brushbar by fitting the belt side first. Push other side of brushbar back into the floorhead and replace floorhead cover.
don't forget your accessories! Order at: www.DirtDevil.co.uk Pre-motor filter (Type 132) 1-1-135931-00 2-in-1 tool (Type 3) 1-1-135932-00 A replacement 2-in-1 tool for your 2-in-1 Cordless vacuum.
POSSIBLE SOLUTION Why does my vacuum cleaner have no power? • Check the machine is fully charged. Go to ‘Using your machine’. • Check the charger is plugged into the mains and correctly connected to the docking station. Go to ‘Getting started’. • Check the handheld has been correctly fitted into the main body. • Check terminals on vacuum, handheld and docking station are clean. Go to ‘Let’s talk technical’. • If the brushbar has been obstructed, the Motor Protection Sensor may have been activated.
LIMITED GUARANTEE It’s quick and easy to register for your free 1 year guarantee online at www.DirtDevil.co.uk. Or call our Customer Service Department at 0330 026 2626 Monday-Friday 8:30am to 6:00pm. Please retain your original receipt for proof of purchase. Please make a note of the serial number and model number of the product before calling.
7 NOTES
Call our Customer Service Department at 0330 026 2626 Monday-Friday 9:00am to 5:00pm. www.DirtDevil.co.uk Vax Limited, trading as Dirt Devil. 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN. EEC Statement of Compliance: Manufacturer/EEC importer: Dirt Devil Limited, hereby on our own responsibility, declare that the DDH01 (E01/E02) series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive.
