Operation Manual

27
4 Cleaning windows
GB
4.2 Dampening and cleaning windows
1. Point the spray nozzle at the surface being
cleaned (Fig. 4).
2. Actuate the spray button several times
(Fig. 4/1) thus dampening the surface be-
ing cleaned.
3. Allow the mixture to soak in briefly without
letting it dry.
4. Pre-clean the surface with the appliance
switched off using the fitted squeegee cloth
thus removing any adhered dirt.
5. Switch on the window vacuum cleaner at its
On/Off button (Fig. 4/2).
- The charging/operating light lights up.
6. Squeegee the surface being cleaned slowly
in strips.
7. Wipe the squeegee lip with a dry cloth after
each strip.
8. Once you are finished with cleaning, switch
the window vacuum cleaner off at the On/
Off button (Fig. 4/2).
- The charging/operating light goes out.
21
4
ATTENTION:
In case of heavy soiling or coarse particles
of dirt you will need to soak them substan-
tially and pre-clean them with other cleaning
utensils. Otherwise the window vacuum
cleaner may become blocked.
NOTE:
Make sure that you have installed a fresh
squeegee cloth. We recommend that you
use the gentle microfibre cloth (Fig. 2/4 and
Fig. 2/8) or the cloth for coarse soiling
(Fig. 2/5 and Fig. 2/9) in accordance with
the surface being cleaned and the level of
soiling.