User manual

4.2 Replacing the carbon filter

1. Make sure that the plug has been disconnected from the mains

socket.

2. Push the release catches on the front panel (Fig. 7).

Carefully remove the front panel.

3. Remove the used carbon filter from the HEPA filter (Fig. 8).

4. Unpack the new carbon filter.

5. Fit the new carbon filter to the hook and eye fasteners on the

HEPA filter.

6. Place the front panel in the recesses in the bases of the appli-

ance (Fig. 9/arrows).

7. Then push down the front panel (Fig. 10) until you hear and see

the release catches click into place.

CAUTION:

The carbon filter cannot be cleaned. It can only be replaced (for

ordering details see Zchapter 5.3, „Accessories and spare parts“).

NOTE:

Dispose of the used filter with the domestic waste.

NOTE:

It does not matter which way round you attach the new filter.

However, as soon as the filter has been used, you can no longer

turn it round as dirt would otherwise get into the HEPA filter.

02_AC150, 250, 350_GB.book Seite 27 Donnerstag, 12. Februar 2015 9:51 09