SPLIT.CONVERTER User's Manual Version 2.
Copyright All rights reserved. Permission to reprint or electronically reproduce any document or graphic in whole or in part for any reason is expressly prohibited, unless prior written consent is obtained from the DirectOut GmbH. All trademarks and registered trademarks belong to their respective owners. It cannot be guaranteed that all product names, products, trademarks, requisitions, regulations, guidelines, specifications and norms are free from trade mark rights of third parties.
Table of contents About This Manual 5 How to Use This Manual................................................................................ 5 Conventions................................................................................................... 5 CHAPTER 1: Overview 6 Introduction.................................................................................................... 6 Feature Summary...........................................................................................
This page is left blank intentionally. page 4 of 24 SPLIT.CONVERTER Manual - Version 2.
About This Manual About This Manual How to Use This Manual This manual guides you through the installation and operation of the device. Use the Table of Contents at the beginning of the manual or Index Directory at the end of the document to locate help on a particular topic. You can access more information and latest news by visiting on the DirectOut website at www.directout.eu. Conventions The following symbols are used to draw your attention to: TI P S ! indicate useful hints and shortcuts.
CHAPTER 1: Overview CHAPTER 1: Overview Introduction The SPLIT.CONVERTER is a combined MADI format converter and signal splitter with four MADI ports. With one RU height, two redundant power supplies and a straightforward source selector it allows for instantaneous conversion or distribution of MADI signals.
CHAPTER 1: Overview Applications SPLIT.CONVERTER can be used to convert MADI signals in “mixed environments” or for distribution of MADI signals. Typical applications include: • Switching converter units between control rooms • Redundancy splitting/switching (manually) during recording or live sound applications. • Splitting signals for live events (FOH, monitoring, recording) • Conversion between optical and coaxial connections to link devices • Conversion between single-mode and multi-mode • ...
CHAPTER 2: Legal issues & facts CHAPTER 2: Legal issues & facts Before Installing This Device WAR NING! Please read and observe all of the following notes before installing this product: • Check the hardware device for transport damage. • Any devices showing signs of mechanical damage or damage from the spillage of liquids must not be connected to the mains supply, or disconnected from the mains immediately by pulling out the power lead. • All devices must be grounded.
CHAPTER 2: Legal issues & facts First Aid (in case of electric shock) WA R N I N G ! • Do not touch the person or his/her clothing before power is turned off, otherwise you risk sustaining an electric shock yourself. • Separate the person as quickly as possible from the electric power source as follows: -- Switch off the equipment. -- Unplug or disconnect the mains cable. • Move the person away from the power source by using dry insulating material (such as wood or plastic).
CHAPTER 2: Legal issues & facts Updates DirectOut products are continually in development, and therefore the information in this manual may be superseded by new releases. To access the latest documentation, please visit the DirectOut website: www.directout.eu. Intended Operation The SPLIT.CONVERTER is designed for the conversion and distribution of MADI signals (AES10) and other signals which meet the electrical specifications of MADI.
CHAPTER 2: Legal issues & facts Conformity & Certificates CE This device complies with the basic requests of applicable EU guidelines. The appropriate procedure for approval has been carried out. RoHS (Restriction of the use of certain Hazardous Substances) This device was constructed fulfilling the directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment 2002/95/EC.
CHAPTER 2: Legal issues & facts Contents The contents of your SPLIT.CONVERTER package should include: • 1 x SPLIT.CONVERTER (19’’, 1 RU) • 2 x power chord • 2 x fixing unit for power plug • 1 x User's Manual Two different MADI I/O configurations are available: 2 x SC-Socket & 2 x BNC coaxial (Version BNC / SC) 4 x SC-Socket (Version SC / SC, 'optical') Single-Mode / Multi-Mode The SC ports are multi-mode as default. It is possible to equip the device with single-mode SC ports.
CHAPTER 3: Installation CHAPTER 3: Installation Installing the Device 1. Open the packaging and check that the contents have been delivered complete and undamaged. 2. Fix the device in a 19’’ frame with four screws, or place it on a non-slip horizontal surface. WA R N I N G ! Avoid damage from condensation by waiting for the device to adapt to the environmental temperature. Proper operation can only be guaranteed between temperatures of 5º C and 45º C and a maximum relative humidity of 80%, noncondensing.
CHAPTER 3: Installation 4. Connect the signal cables for the MADI signals to the device. 5. Using the power cord provided connect the PSU to a matching power supply. WAR NING This device must be connected to the mains using the three-cord power leads supplied with the system. Only supply the voltages and signals indicated (84 V – 264 V). NOTE This device may operate with only one power supply.
CHAPTER 3: Installation This page is left blank intentionally. SPLIT.CONVERTER Manual - Version 2.
CHAPTER 4: Operation CHAPTER 4: Operation Global Control The control on the right of the front panel indicates the power supply. Power switches are on the back panel: PSU 1 & PSU 2 (rear) 2 Switches Enable / disable power supply. PSU 1 & PSU 2 (rear) C13 socket Connect the power supply here (84 - 264 V AC).
CHAPTER 4: Operation Connecting MADI The MADI ports are used for transmission of 64 audio channels (AES10).
CHAPTER 4: Operation Signal Routing All four MADI input signals are fed to a routing matrix where they can be distributed to any output. This allows the SPLIT.CONVERTER to convert and distribute MADI signals: PORT A (ABCD) Encoder Turn the rotary control to the desired position to select the desired input source for output A. PORT B (ABCD) Encoder Turn the rotary control to the desired position to select the desired input source for output B.
CHAPTER 4: Operation Examples Format conversion of four MADI signals (coaxial < > optical) Signal C Signal D Signal A Signal B Signal distribution of one MADI signal (4 x optical, '1:4') Signal A Signal A Signal A Signal A Format conversion of four MADI signals (single mode <> multi-mode) Signal C SPLIT.CONVERTER Manual - Version 2.
CHAPTER 5: Troubleshooting and Maintenance CHAPTER 5: Troubleshooting and Maintenance Troubleshooting To identify a possible defect with the device please consult the following table. If the fault cannot be resolved using these instructions, please contact your local DirectOut representative or visit support.directout.eu. Issue Possible reason Solution Device doesn’t work. Power supply is broken.
CHAPTER 6: Technical Data CHAPTER 6: Technical Data Dimensions • Width 19’’ (483 mm) • Height 1 RU (44.5 mm) • Depth 10’’ (254 mm) Weight • about 3.
Index Index B Bit-transparent.......................................... 18 W Warranty................................................... 10 C Compatibility see Bit-transparent Conformity & Certificates CE......................................................... 11 RoHS.................................................... 11 WEEE................................................... 11 Contact..................................................... 11 Contents...................................................
Notes SPLIT.CONVERTER Manual - Version 2.
DirectOut GmbH Leipziger Strasse 32 09648 Mittweida Germany T: +49-3727-5665-100 F: +49-3727-5665-101 www.directout.
