Manual

page 64 of 88 Montone.42 Manual - Version 2.0
CHAPTER 6: Remote Operation
Mode auto = PTP-clock master / slave confi guration is
auto negotiated between devices in the
network. Module’s master / slave state
may change automatically.
slave only = PTP-clock slave confi guration is
preferred. Module clocks to another
device in the network
preferred master = PTP-clock master confi guration is
preferred. Module acts as network
grandmaster. Priority values are adjusted
automatically to ensure Grandmaster
status. *
master only = PTP-clock master is forced. **
Profi le Selects predefi ned PTP profi le (default E2E, default P2P,
media E2E, media P2P) or activates customized PTP profi le.
* If more than one device announces as PTP-clock master the network
Grandmaster is determined following the Best Master Clock Algorithm
(BMCA).
** ‘Master only’ confi gures the device to act as Unicast Grandmaster. This setting
is available only with PTP Mode set to ‘unicast’
NOTE
PTP profi le ‚customized‘ allows for individual adjustment of the PTP parameters. If
profi le is set to ‚media‘ or ‚default‘ the PTP parameters cannot be altered and are
displayed only. Factory default setting is PTP Media Profi le E2E.