Manual

page 46 of 88 Montone.42 Manual - Version 2.0
CHAPTER 6: Remote Operation
01 to 32 Click to activate or deactivate single stream.
= stream activated
= stream deactivated
= stream not active, defi ned as backup-stream
INPUT STREAMS Click to activate or deactivate all streams.
= activate all streams
= deactivate all streams (requires confi rmation)
Backup Streams
Example:
Backup stream (input 3) that will act as source in the audio matrix if the current
session (input 1) fails. Switch-over occurs after the defi ned timeout (1s).
Stream 3 is marked accordingly in the status view
Input 1 failed and Input 3 becomes active after the timeout.
NOTE
In case the main input fails the main stream is stopped (IGMP LEAVE) before the
backup stream is being activated. This behaviour ensures that the required network
bandwidth does not increase in case of a failure.