Manual

page 45 of 88Montone.42 Manual - Version 2.0
CHAPTER 6: Remote Operation
Status - Input Streams
The device can subscribe up to 32 streams. The overview displays the basic
information of each stream. The input stream name can be set manually (discovery
protocol: manually, see page 54) overriding the SDP’s stream name information.
A backup stream can be defi ned as source after an adjustable timeout. A central
active / inactive switch allows to toggle the stream state of all input streams at
once.
01 to 32 State of incoming streams
(OFF) = stream not activated
(ON) = stream activated, receiving data
(ON) = stream activated, receiving data via
one port only (input redundancy)
(blinking) = stream activated, not receiving data
(unicast, connection not established)
01 to 32
Name
Name of stream gathered from SDP or set manually
in the stream settings dialog.
01 to 32
xx ch
Number of audio channels transported by the stream