Manual

page 38 of 88 Montone.42 Manual - Version 2.0
CHAPTER 6: Remote Operation
MADI 1 to 4
Frame Format Frame format for MADI output signal
(48k / 96k Frame)*
Channel Mode Channel mode for MADI output signal
(56 ch / 64 ch)
Redundance Port Selection for redundant port
(none / 1 and 2 / 3 and 4)
Subcode Transparency off = new subcode data is generated
on = incoming subcode is preserved at the output,
depending on the transparency setting.
Transparency Mode VUCP only = only VUCP bits are preserved **
full = all subcode data is preserved
* 96k Frame format is available at 2 FS operation only.
** Validity (V), User (U), Channel Status (C), Parity (P)
NOTE
Full transparency pass-through of the incoming subcode data may lead to a corrupt
output signal when no signal is available from the assigned input source.
The settings are equivalent for all MADI ports.
See „Appendix C - AES3 Transparency“ on page 86 for working with subcode
data and transmission according to SMPTE ST 2110-31.